Scaffold & Beam & Trestle Hoists

This pivoting 150kg electric hoist with a lifting height of 30m is ideal for the small builder or larger contractor to lift material from the ground but to also lower material to the ground safely. It has a top limit lever and micro switch to stop the hoist when it is at the top of its lift safely. The spring loaded safety catch on the hook keeps the load carrier within the hook.

There are also several accessories available for the ES150 to enable various types of materials (see below)

Distance from mounting to Lifting point is 720mm.

This 300Kg hoist has a 30m height of lift which is designed to be used within scaffolding or on a flat room where there is no scaffold to attach a lifting hoist to. It has a running beam 3.3m long and allows an overhang of 1m beyond the edge of the safety board to enable material to be maneuvered along the hoist runway safely and without effort. 

It is ideal for the small builder or larger contractor to lift material from the ground, or lower material to the ground safely. It has a top limit lever and micro switch to stop the hoist safely when it is at the top of its lift. The hook has a spring loaded safety catch to keep the load carrier within the hook. The Hoist also has a brake to control the travel along its runway and rubber stops at each end of the travel beam.

To comply with lifting regulations, it comes complete with a front kickboard and lockable back ballast boxes (150Kg in each box required NOT SUPPLIED)

There are also several accessories available for the ET300 to enable various types of materials (see below)